Here is a plan for building a sharpening system for your turning tools. The plan was developed by two East Tennesseans, Josh Bowman and John K. Jordan. (Note the "K". This is a different John Jordan than the one who demonstrated at our club a few years ago.)
Here is an excerpt from Josh Bowman's comments on another forum.
Over the past weeks, John K. Jordan and myself have finalized a pretty good set of instructions to build a sharpening system cheap. It doesn't have an adjustable platform, but has plenty of adjustment in the gouge and skew jigs. I kept the platform fixed since most new turners only use the platform to sharpen scrapers and bits. But later one might be added to it. My goal was to focus on new turners and keep the choices limited so they will spend more time learning to use their tools instead of experimenting with different grinds. But that was just my opinion.
Anyway you can get a copy of the file at www.tristatewoodturners.com, look in the top right there is a link or go to the Articles page to download the PDF Cheap Sharpening System.
Feel free to use and distribute it.
|This article by Leon Olson, Minnesota
Published March 2017 in the Tennessee Association of Woodturners newsletter.
Reprinted here with permission of TAW.